Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Z4
  6. : How to replace the hydraulic motor of the soft top of a BMW Z4

BMW Z4 - Video tutorial

Model: BMW Z4 E85, E86 - Years 2002-2008
Part: Hydraulic pistons
Operation: How to replace the hydraulic motor of the soft top of a BMW Z4

In order to get started, we will need to open the trunk. Let's start by removing the top cover that is between the trunk and the hood housing. Once this is done, we proceed with unscrewing and removing all the bolts along the perimeter of the hood housing. At this point we will have to move into the cockpit. On the sides of the rear seats there are two grilles, which we are going to remove. Below the grids, there are respectively a bolt for the grille, also to be unscrewed and removed. Once this is done, we will have to remove the edges of the hood from their housing, and disconnect the plug that operates it. At this point we can remove the hood. When we have finished removing the hood, we will have obtained access to the taste hydraulic motor. It will be necessary to go and disconnect the plugs connected to it. Once the pins have been disconnected, we will have successfully removed the hydraulic motor that drives the soft top. To fit the new hydraulic motor, simply follow the steps in reverse.


Posted on 2 March 2024 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos