Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Convertible Top Motor of the BMW Z4

Model: BMW Z4 E85, E86 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

Today, follow these main instructions to remove and replace the convertible top motor of the BMW Z4 in a few simple steps. First, remove the convertible top by taking off the plastic panel at the back; underneath, you will find the convertible top mechanism along with the motor, as shown in the video.

At this point, unscrew the screws to detach the motor from the mechanism, disconnect the wiring to remove it; replace it with a new one, using the original part, and reassemble everything!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Hydraulic Motor for the Convertible Top on a BMW Z4
How to Replace the Hydraulic Motor for the Convertible Top on a BMW Z4
BMW Z4 (2002-2008 / E85, E86) To begin, open the trunk. Start by removing the upper cover between the trunk and the convertible top housing. Once done, proceed to unscrew and remo…
How to Replace the Convertible Top Motor on the BMW Z4?
How to Replace the Convertible Top Motor on the BMW Z4?
BMW Z4 (2002-2008 / E85, E86) To replace the convertible top motor on the BMW Z4, you need to fully raise the top to access the motor underneath: it is located on the left side of…
How to Replace the Convertible Top on a BMW Z4?
BMW Z4 (2002-2008 / E85, E86) To replace the convertible top on a BMW Z4, loosen the screws that secure the tracks of the opening and closing mechanism located inside the trunk. N…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos