Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the trunk hatch from the inside of the BMW X1.

Model: BMW X1 F48 - Years 2015-2022
Part: Checks and maintenance

The instructions in this guide will show us how to open the rear trunk lid from inside the BMW X1. To manually open the trunk lid, simply press the designated button located on the trunk itself; alternatively, it is also possible to unlock the trunk lock from the inside by pressing the specific button found at the bottom of the driver’s side door panel, as shown in the video. The rear trunk lid can also be opened using the remote control button; however, the closing can only be done manually by pressing the button in the case of an electric trunk.

Posted on 16 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the BMW X1?
BMW X1 (2009-2015 / E84) The battery installed on the BMW X1 can be replaced by opening the trunk and removing the panel located at its base. Once removed, it will be possibl…
Where to Find the Fuse Box on BMW X1 E84
Where to Find the Fuse Box on BMW X1 E84
BMW X1 (2009-2015 / E84) In this video tutorial, you can see how to locate the fuse box on a BMW X1 E84: the fuse box on this vehicle is located behind the glove compartment.…
How to replace the rear brake pads on a BMW X1 F48.
How to replace the rear brake pads on a BMW X1 F48.
BMW X1 (2015-2022 / F48) Let's see how to replace the rear brake pads on a BMW X1 F48: we activate the installation mode by connecting the diagnostic tool to the EOBD port, t…

    Frequently Asked Questions

    • X1 2023-2030 - Where is the spare wheel on the BMW X1 located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos