Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of the rear camera of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006

Following these simple steps, we will see how to install the rear camera useful for parking maneuvers on the BMW 3 Series. First of all, we get on board the car and start removing the original radio, unscrewing all the fixing screws and disconnecting the electrical wiring; we then install the new multimedia system compatible with the rear camera (usually provided in the kit), as shown in the video. At this point, we run the wiring to the rear tailgate, installing the camera; all that's left is to adjust the camera until we get the right angle.

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you install the rearview camera of the BMW 3 Series?
How do you install the rearview camera of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To install the rear camera of the BMW 3 Series, you need to open the rear door and unscrew the screws that fix the corresponding panel inside. Once t…
How to install the rear view camera on the BMW 3 Series?
How to install the rear view camera on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To be able to install the rear view camera on the BMW 3 Series, you need to open the boot lid and remove the cover inside it, removing the fastening …
How to mount the reversing camera in the tailgate of a BMW 3 Series
How to mount the reversing camera in the tailgate of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Let's see how to mount the reversing camera in the tailgate of a BMW 3 Series. To begin with, we open the tailgate of the car, then, we remove the in…

How to Remove the Window Regulator Motor from a Volkswagen Touareg

Learn how to remove the door motor from a Volkswagen Touareg. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover, then unscrew the screws inside with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips. Remove the door panel by hand, then use a screwdriver or power screwdriver to unscrew the fastening screws of the door actuator motor. Disconnect the various power terminals and replace it with a new one. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos