Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the door panel of the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Door trim panel

Below we will see the steps useful for disassembling and replacing the front door panel of the BMW X1. First of all, we open the front door and start removing the plastic cover of the handle by prying on the sides; then we unscrew the fixing screws that we find underneath and on the sides of the door panel, as shown in the video. At this point, we disconnect the electrical connector of the window switch panel and the handle cable; in this way it will be possible to access the inside of the door, applying the reverse procedure for reassembly!

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the BMW X1
Disassembly of the front door panel of the BMW X1
BMW X1 (2015-2022 / F48) Today's guide will show us how to disassemble and possibly replace the front door panel of the BMW X1. First, we open the front door of the car and s…
Removing the right door panel BMW X1
Removing the right door panel BMW X1
BMW X1 (2015-2022 / F48) Today we will see the main steps to be able to remove the door panel of a second series BMW X1. First we open the door and with a screwdriver we unsc…
Disassembly of the front door panel of the BMW X1
BMW X1 (2022-2026 / U11) Today we will discover the main instructions that will allow us to disassemble and remove the front door panel of the BMW X1. First, we open the fron…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos