Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Door trim panel

Today's guide will show us how to disassemble and possibly replace the front door panel of the BMW X1. First, we open the front door of the car and start by removing the plastic cover of the handle; then we unscrew all the fastening screws that we find underneath and on the sides of the door panel, as shown in the video. At this point, we lever on the sides to detach it and remove it, disconnecting the electrical connector of the window switch and the handle cable; this way it will be possible to access the inside of the door!

Posted on 10 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the door panel of the BMW X1
Disassembly of the door panel of the BMW X1
BMW X1 (2015-2022 / F48) Below we will see the steps useful for disassembling and replacing the front door panel of the BMW X1. First of all, we open the front door and start…
Disassembly of the front door panel of the BMW X1
BMW X1 (2022-2026 / U11) Today we will discover the main instructions that will allow us to disassemble and remove the front door panel of the BMW X1. First, we open the fron…
How to Remove the Door Panel of a BMW X1?
How to Remove the Door Panel of a BMW X1?
BMW X1 (2009-2015 / E84) To remove the door panel of the BMW X1, use a tool to pry off the trim pieces located at the top of the panel and along the door's armrest. Once thes…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos