Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the BMW X3

Model: BMW X3 F25, MK 2 - Years 2010-2017
Part: Headlight bulb

Replacing the headlight bulb of the BMW X3 model F25 is a very simple operation to perform independently, also thanks to our video tutorial. The steps to be taken are: -open the front hood; -remove the cap of the light fixture; -disconnect the connector; -remove the bulb body; -insert the new bulb; -connect the connector; -close the light fixture cap; -close the hood; To replace the headlight bulb on the right side, we will have to follow the same steps as indicated above. If the bulb does not work and the connector is not defective, it may be necessary to replace the corresponding fuse.

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the BMW X3
How to replace the headlight bulb of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) .. Today we will explain how to replace the headlight bulb of the BMW X3, model e83. We need to open the front hood and remove.. …
Bmw X3 headlight position / low beam bulb replacement
Bmw X3 headlight position / low beam bulb replacement
BMW X3 (2003-2010 / MK 1, E83) In this short video tutorial we will see the steps on how to remove and replace the headlight bulb, position light and low beam of a BMW X3 first ser…
How to Replace the Headlight Bulbs on a BMW X3
How to Replace the Headlight Bulbs on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) Do you want to replace the headlight bulbs on a BMW X3? Let's see how to proceed: open the hood by pulling the lever located at the bottom right of t…

Other guides you may be interested in

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos