Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Door Won't Open from Inside the BMW E46: How to Fix It?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Handle

If the interior handle of the door in your BMW E46 is broken, it likely means that the connecting cable that operates it has deteriorated or, more simply, has come undone. What should you do? Remove the support cover from the door structure; at this point, if you notice that the cable is disconnected, simply place it back into the appropriate section that corresponds with the handle (with the cover installed). The installation is very simple as it uses a snap-fit technique. Finally, close the cover and secure it as it was before.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

What to do if the doors of the BMW 3 Series do not open
What to do if the doors of the BMW 3 Series do not open
BMW Serie 3 (2012-2019 / F30, F31) In this video we can see how to fix it if the doors of the BMW 3 Series no longer open from any side of the car. Clearly from the outside we can alwa…
How to remove the lock cylinder on the BMW 3 Series E46
How to remove the lock cylinder on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this short and simple video we will see the steps that will allow us to remove and, if necessary, replace the front door lock on the BMW 3 Series …
How to fix the problem of hazy or broken headlights on a BMW 3 Series E46 version.
How to fix the problem of hazy or broken headlights on a BMW 3 Series E46 version.
BMW Serie 3 (1998-2006 / E46) In this video, we see how it is possible to fix foggy or damaged windows if we own a BMW 3 Series. The internet is full of videos with a thousand way…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos