Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Verano
    4. : How to change the stereo on a Buick Verano

Buick Verano - Video tutorial

Model: Buick Verano MK 1 - Years 2010-2017
Part: Car stereo
Operation: How to change the stereo on a Buick Verano

Changing the stereo on a Buick Verano is easier than it looks. Let's see how to proceed. Let's start by removing the plastic frame of the center console. It is made of plastic and is pressurized, it can be removed easily. Be delicate, it is a single piece, it reaches up to under the gear knob, where there is a screw. However the whole piece comes off without problems. Just be careful not to break it because it is very big. At this point the fixing screws of the stereo system are all in plain sight: all you have to do is remove the ones that interest us to change the piece. When you have replaced the part you are interested in, all you have to do is put the frame back, tighten the single screw that holds it in place and that's it.


Posted on 10 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos