Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Regal
    4. : How to replace Buick Regal rear light bulbs

Buick Regal - Video tutorial

Model: Buick Regal MK 4 - Years 1997-2008
Part: Rear light bulb
Operation: How to replace Buick Regal rear light bulbs

We see in this guide the instructions that will allow us to disassemble and replace the rear light bulbs of the Buick Regal. First of all, we open the tailgate of the trunk and begin to unscrew the plastic screws of the light, in order to remove it from the outside; after which we go to remove any non-working light bulbs, whether it is the position or stop light, as shown in the video. At this point we install the new bulbs, having the same attack; then we reassemble and fix the taillight correctly, following the video tutorial to the end!


Posted on 1 September 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos