Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Buick
  4. :
  5. Enclave
  6. : How do you replace the front brake pads on your Buick Enclave?

Buick Enclave - Video tutorial

Model: Buick Enclave MK 1 - Years 2008-2017
Part: Brake pads
Operation: How do you replace the front brake pads on your Buick Enclave?

To be able to replace the front brake pads of your Buick Enclave you have to go and lift the car, so that the wheel corresponding to the pads to be replaced is not in contact with the floor. Once the car has been lifted, it will be necessary to unscrew the wheel bolts, removing it and accessing the underlying components. It will now be possible to unscrew the screws that fix the brake caliper, so that it is removed from the brake disc, allowing the old pads inside to be extracted. After the new pads have been inserted, it will be possible to fix the brake caliper and the relative wheel again.


Posted on 16 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos