Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb in the Buick Enclave

Model: Buick Enclave MK 1 - Years 2008-2017
Part: Headlight bulb

Here are the instructions to remove and replace the front headlight bulb in the Buick Enclave. First, lift the vehicle and start removing all the plastic clips on the sides of the front wheel well to take it off; then remove the plastic cover protecting the bulbs, as shown in the video. Now disconnect the electrical connector and remove the entire assembly, along with the xenon bulb; then replace it with a new one of the correct type and with the same base, applying the reverse procedure!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Buick Enclave?
Buick Enclave (2008-2017 / MK 1) To replace the headlight bulb on a Buick Enclave, lift the vehicle so that the front wheel corresponding to the bulb to be removed is off the ground.…
How to Replace the Air Filter in the Buick Enclave?
How to Replace the Air Filter in the Buick Enclave?
Buick Enclave (2008-2017 / MK 1) In this tutorial, you will see how to replace the air filter in the Buick Enclave, a very simple and quick operation. Before proceeding, wait for the…
How to Replace the Remote Battery in a Buick Enclave?
How to Replace the Remote Battery in a Buick Enclave?
Buick Enclave (2018-2025 / MK 2) As you can see in this tutorial, replacing the remote battery in a Buick Enclave is an extremely simple and inexpensive operation. For this, you will…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos