Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light on the Buick Lacrosse

Model: Buick Lacrosse MK 2 - Years 2010-2016
Part: Fog lights

To replace the fog lights on this vehicle model, follow the instructions below for the replacement process. First, lift the vehicle and remove the screws securing the splash shield under the light. Then, unscrew the screws holding the light to remove it. Next, take the new light and position it, then screw in the mounting screws and reconnect the power connector. Repeat the same procedure for the other light.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Buick Lacrosse
How to Replace the Headlight Bulb on a Buick Lacrosse
Buick Lacrosse (2005-2009 / MK 1) To replace the headlight bulb on a Buick Lacrosse, open the hood to access the rear of the headlight corresponding to the bulb you want to replace. Y…
How to Replace the Front Headlight on a Buick LaCrosse
How to Replace the Front Headlight on a Buick LaCrosse
Buick Lacrosse (2010-2016 / MK 2) In this video tutorial, we will see the steps on how to disassemble and replace the front headlight on a Buick LaCrosse, following the instructions b…
How to Replace the Rear Headlight Bulb on a Buick Lacrosse
How to Replace the Rear Headlight Bulb on a Buick Lacrosse
Buick Lacrosse (2005-2009 / MK 1) To replace the rear headlight bulb on a Buick Lacrosse, open the hood to access the plastic panels inside the trunk that correspond to the headlight.…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos