Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cadillac Cts
    4. : Checks and maintenance

Cadillac Cts - Checks and maintenance

Cadillac Cts (2008-2014 / MK 2)
How to reset the oil change indicator on the Cadillac CTS
In the following video, we will see how to reset the oil change on a 2012 Cadillac CTS. The procedure is very simple, you just need to go to the settings on …read all…
Posted on 9 November 2023 by ScegliAuto
Cadillac Cts (2008-2014 / MK 2)
How to reset the oil service in the Cadillac CTS?
In this tutorial we can see how to reset the oil service in the Cadillac CTS. Before proceeding, of course, we will have to complete the oil change and the …read all…
Posted on 24 April 2024 by ScegliAuto
Battery (4) Spark plugs (2) Key (6) -board computer (1) Checks and maintenance (2) Bearing (1) Headlight (1) Tail light (1) Air filter (7) Cabin air filter (3) Grille (1) Injectors (2) Light bulb (1) Headlight bulb (2) Engine oil (1) Door panel (1) Front bumper (1) Instrument cluster (2) Wheel (1) Fuse box (2) Lambda sensor (1) Outside rearview mirror (1) Manufacturer's coat of arms (1) Windshield washer nozzle (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos