Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : Warning light – error code

Chevrolet Aveo - Warning light – error code

Warning Light – Error Code Chevrolet Aveo (2002-2011 / mk 1, t 200)

Chevrolet Aveo (2002-2011 / MK 1, T200)
How to reset the engine warning light, or MIL light, on the Chevrolet Mk1 Aveo
This guide shows how to reset the engine warning light (or MIL light) on the Chevrolet Aveo. Since the MIL light indicates a fault in the propulsion system, …Read all…
Posted on 10 June 2026 by ScegliAuto
Chevrolet Aveo (2002-2011 / MK 1, T200)
Reset Oil Warning Light on a Chevrolet Aveo
Learn how to reset the oil warning light on a Chevrolet Aveo. Turn on the ignition with the key to see the oil light. Use the left control lever to reset the …Read all…
Posted on 11 May 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Shocks (3) Car stereo (13) Ignition coil (1) Spark plugs (4) Body (1) Key (1) Timing belt (2) Checks and maintenance (2) Dashboard (2) Bearing (3) Brake rotors (1) Headlight (4) Tail light (2) Fog lights (2) Air filter (2) Cabin air filter (5) Fuel filter (2) Clutch (1) Headlight bulb (2) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) Handle (2) Starter motor (3) Clock (3) Door trim panel (3) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (1) Radiator (2) Fuse box (33) Door lock (1) Suspension system (1) Side mirror (2) Warning light – error code (2) (1) Service warning light (8) Windshield wipers (1) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos