Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : Headlight

Chevrolet Aveo - Headlight

Chevrolet Aveo (2002-2011 / MK 1, T200)
How to remove the headlight on Chevrolet Aveo
How to remove the headlight on Chevrolet Aveo. We open the bonnet by pulling the lever located at the bottom right of the dashboard, we secure the same with …read all…
Posted on 17 October 2023 by ScegliAuto
Chevrolet Aveo (2002-2011 / MK 1, T200)
Front headlight disassembly instructions
Open the front hood and make sure it is supported safely. Removing the headlight is very simple as it is not necessary to remove the bumper. It is therefore …read all…
Posted on 2 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (3) Car stereo (9) Coil (1) Spark plugs (3) Timing belt (2) -board computer (1) Checks and maintenance (6) Dashboard (1) Bearing (3) Brake discs (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (2) Cabin air filter (5) Petrol filter (1) Clutch (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Handle (1) Starter motor (2) Door panel (3) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (3) Radiator (2) Fuse box (9) Lock (1) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos