Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Aveo
  6. : Bearing

Chevrolet Aveo - Bearing

Bearing Chevrolet Aveo (2002-2011 / mk 1, t 200)

Chevrolet Aveo (2002-2011 / MK 1, T200)
How to Replace the Front Hub Bearing on a Chevrolet Aveo?

In this tutorial, you will see how to replace the front hub bearing on a Chevrolet Aveo, a straightforward operation but one that requires good manual skills. …Read all…
Posted on 21 August 2026 by ScegliAuto
Chevrolet Aveo (2002-2011 / MK 1, T200)
How to Replace the Front Wheel Bearing on a Chevrolet Aveo?

To replace the front wheel bearing on a Chevrolet Aveo, lift the car with a jack so that the corresponding front wheel can be removed from its housing. Behind …Read all…
Posted on 12 September 2026 by ScegliAuto
Chevrolet Aveo (2002-2011 / MK 1, T200)
How to Replace the Rear Wheel Bearing on a Chevrolet Aveo

The first step is to remove the wheel that requires the bearing replacement, as the bearing is located inside the wheel hub. After removing the wheel, proceed …Read all…
Posted on 8 March 2026 by ScegliAuto

Cigarette lighter (1) Airbag (1) Shocks (3) Car stereo (13) Ignition coil (1) Spark plugs (4) Body (1) Key (1) Timing belt (2) Checks and maintenance (2) Dashboard (2) Bearing (3) Brake rotors (1) Headlight (4) Tail light (2) Fog lights (2) Air filter (2) Cabin air filter (5) Fuel filter (2) Clutch (1) Headlight bulb (2) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) Handle (2) Starter motor (3) Clock (3) Door trim panel (3) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (1) Radiator (2) Fuse box (33) Door lock (1) Suspension system (1) Side mirror (2) Warning light – error code (2) (1) Service warning light (8) Windshield wipers (1) Blower motor (2)

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos