Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : Timing belt

Chevrolet Aveo - Timing belt

Timing Belt Chevrolet Aveo (2002-2011 / mk 1, t 200)

Chevrolet Aveo (2002-2011 / MK 1, T200)
Removing the Timing Belt on a Chevrolet Aveo 1.4 - 1.6 16V
Today, we will see the step-by-step instructions to remove and replace the timing belt on a 2006 Chevrolet Aveo 1.4 or 1.6 16 valve. First, lift the vehicle …Read all…
Posted on 21 May 2026 by ScegliAuto
Chevrolet Aveo (2002-2011 / MK 1, T200)
How to Replace the Timing Belt on a Chevrolet Aveo
Learn how to remove and change the timing belt on a Chevrolet Aveo. Lift the car on a column lift, remove the front wheel and the right wheel arch cover using …Read all…
Posted on 31 March 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Shocks (3) Car stereo (13) Ignition coil (1) Spark plugs (4) Body (1) Key (1) Timing belt (2) Checks and maintenance (2) Dashboard (2) Bearing (3) Brake rotors (1) Headlight (4) Tail light (2) Fog lights (2) Air filter (2) Cabin air filter (5) Fuel filter (2) Clutch (1) Headlight bulb (2) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) Handle (2) Starter motor (3) Clock (3) Door trim panel (3) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (1) Radiator (2) Fuse box (33) Door lock (1) Suspension system (1) Side mirror (2) Warning light – error code (2) (1) Service warning light (8) Windshield wipers (1) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos