Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : Suspensions

Chevrolet Aveo - Suspensions

Chevrolet Aveo (2002-2011 / MK 1, T200)
Suspension swing arm replacement
In the event of noisiness when running on the bumpy wheel coming from the wheel, it is very likely that some bushings or the head of the oscillating arm of the …read all…
Posted on 10 September 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (3) Car stereo (9) Coil (1) Spark plugs (3) Timing belt (2) -board computer (1) Checks and maintenance (6) Dashboard (1) Bearing (3) Brake discs (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (2) Cabin air filter (5) Petrol filter (1) Clutch (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Handle (1) Starter motor (2) Door panel (3) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (3) Radiator (2) Fuse box (9) Lock (1) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (1) Interior blower (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos