Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Suspension Wishbone

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Suspension system

See other generations:
Video tutorial

If you hear noise while driving over rough surfaces coming from the wheel, it is likely that a bush or the ball joint of the suspension wishbone has failed. In this case, you can use a repair kit or, given the relatively low cost, opt for a complete wishbone replacement.

Lift the vehicle on a ramp, remove the front wheel, and the nut securing the ball joint to the hub support. Use a forked puller to remove it. Next, move on to the bolts securing the wishbone to the subframe and remove it, then reverse the process to install the new one.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing Front Shock Absorbers
Replacing Front Shock Absorbers
Chevrolet Aveo (2002-2011 / MK 1, T200) Lift the vehicle on a hydraulic lift and remove the front wheel; proceed to detach the link connecting the shock absorber to the suspension wishbone,…
How to Replace the Front Hub Bearing on a Chevrolet Aveo?
How to Replace the Front Hub Bearing on a Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) In this tutorial, you will see how to replace the front hub bearing on a Chevrolet Aveo, a straightforward operation but one that requires good manua…
Front Shock Absorber Replacement Instructions
Front Shock Absorber Replacement Instructions
Chevrolet Aveo (2002-2011 / MK 1, T200) To replace the front shock absorber, you first need the appropriate tool (or clamps) to compress the spring. Start by lifting the vehicle on a ramp a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos