Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Hub Bearing on a Chevrolet Aveo?

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Bearing

See other generations:
Video tutorial

In this tutorial, you will see how to replace the front hub bearing on a Chevrolet Aveo, a straightforward operation but one that requires good manual skills. First, lift the side you will be working on, then remove the wheel, caliper, and brake disc.

Next, unscrew the large central retaining nut, disconnect the steering arm, and unscrew the various upper retaining bolts of the hub. At this point, you can extract the bearing from the hub using a press, insert the replacement part, and reassemble everything by following the reverse procedure.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel Bearing on a Chevrolet Aveo?
How to Replace the Front Wheel Bearing on a Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) To replace the front wheel bearing on a Chevrolet Aveo, lift the car with a jack so that the corresponding front wheel can be removed from its housin…
How to Replace the Rear Wheel Bearing on a Chevrolet Aveo
How to Replace the Rear Wheel Bearing on a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) The first step is to remove the wheel that requires the bearing replacement, as the bearing is located inside the wheel hub. After removing the wheel…
Where is the fuse box of the Chevrolet Aveo
Where is the fuse box of the Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) In this mini guide dedicated to your Chevrolet Aveo first series (2002-2006), discover where the car's fuse box is located and how to access the fuse…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos