Do it yourself
| ||||
|
Chevrolet Aveo - Video tutorial
Model: Chevrolet Aveo
T200, MK 1
- Years 2002-2011 In order to replace the front wheel bearing on your Chevrolet Aveo, you need to lift the car with a jack so that the corresponding front wheel can be removed from its housing. Behind it, it will be possible to identify the wheel hub, which must be released from the drive shaft by unscrewing the corresponding screws. When the hub has therefore been completely removed from its housing, a puller can be used to remove the bearing from the center of its housing. In this way it will be possible to insert a new bearing and reassemble the hub and the wheel.
Posted on 5 December 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |