Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : Instrument cluster

Chevrolet Aveo - Instrument cluster

Chevrolet Aveo (2002-2011 / MK 1, T200)
How to remove the instrument panel in a 2004 Chevrolet Aveo?
To remove the instrument panel, we must first free it from the plastic frame that surrounds it and is installed only by interlocking. Pull it away to reveal …read all…
Posted on 24 June 2023 by ScegliAuto
Chevrolet Aveo (2002-2011 / MK 1, T200)
How to reset the oil light on the Chevrolet Aveo
If you have just had your Chevrolet Aveo serviced regularly but the corresponding yellow warning light continues to come on steadily then you must necessarily …read all…
Posted on 4 May 2023 by ScegliAuto
Chevrolet Aveo (2002-2011 / MK 1, T200)
How to reset the engine trouble light, or MIL light, on the Chevrolet Mk1Aveo
The guide shows you how to reset the Chevrolet Aveo engine light (or MIL) light. Since the MIL light indicates a fault in the propulsion system, which can be a …read all…
Posted on 9 March 2024 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (3) Car stereo (9) Coil (1) Spark plugs (3) Timing belt (2) -board computer (1) Checks and maintenance (6) Dashboard (1) Bearing (3) Brake discs (1) Headlight (2) Tail light (2) Fog lights (2) Air filter (2) Cabin air filter (5) Petrol filter (1) Clutch (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Handle (1) Starter motor (2) Door panel (3) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (3) Radiator (2) Fuse box (9) Lock (1) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (1) Interior blower (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos