Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on a 2020 Chevrolet Aveo

Model: Chevrolet Aveo MK 2, T300 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight

See other generations:
Video tutorial

The vehicle shown in the video is the 2020 Chevrolet Aveo, which has been updated with LED bulbs. Removing the headlamps can be necessary not only for replacement due to breakage but also for maintenance and cleaning.

Here’s how to carry out this task: The locking pins are located at the top, bottom, and rear. To remove the lower pins, you need to take off the bumper, which is bolted in place.

For the rear pin, partially detach the wheel arch liner and reach in with your hand. Once you disconnect the electrical connector, the headlamp is ready to be pulled out.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Chevrolet Aveo 2009
How to Replace the Front Headlight Bulb on the Chevrolet Aveo 2009
Chevrolet Aveo (2002-2011 / MK 1, T200) In this new mini-guide dedicated to your Chevrolet Aveo first series (2009), we will discover how to quickly and safely replace the front headlight b…
How do you remove the headlight of the 2020 Chevrolet Aveo?
How do you remove the headlight of the 2020 Chevrolet Aveo?
Chevrolet Aveo (2012-2020 / MK 2, T300) It is not necessary to disassemble the headlight of a vehicle because it is broken, for example following an accident, you could also decide to repla…
How to Remove the Front Headlight on Chevrolet Aveo
How to Remove the Front Headlight on Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) How to remove the front headlight on a Chevrolet Aveo. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos