Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : Bearing

Chevrolet Matiz - Bearing

Bearing Chevrolet Matiz (1998-2010 / mk 1)

Chevrolet Matiz (1998-2010 / MK 1)
How do you replace the rear wheel bearing of the Chevrolet Matiz?
The replacement of the rear wheel bearing on the Chevrolet Matiz is done by lifting the car so that the wheel bolts can be loosened. This way the wheel will be …Read all…
Posted on 17 April 2024 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
How to Replace the Rear Wheel Bearing on a Chevrolet Matiz
To replace the rear wheel bearing on a Chevrolet Matiz, lift the car so that the wheel fastening bolts can be undone. This will allow the wheel to be …Read all…
Posted on 11 July 2026 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
How to Replace the Rear Hub Bearing on a Chevrolet Matiz
In this video, see how to remove and replace the rear wheel bearing on a second series Chevrolet Matiz. First, lift the rear of the vehicle and start by …Read all…
Posted on 12 May 2026 by ScegliAuto
Alternator (2) Speaker (1) Air conditioning (1) Car stereo (3) Battery (1) Air vents (1) Spark plugs (2) Key (1) Timing belt (5) Checks and maintenance (3) Throttle body (1) Dashboard (1) Shifter boot (1) Bearing (3) Brake rotors (1) Headlight (1) Tail light (3) Air filter (4) Cabin air filter (7) Fuel filter (4) Oil filter (2) Parking brake (1) Clutch (3) Fuel injectors (1) Accessory kit (1) Headlight bulb (3) Tail light bulb (9) Power window motor (1) Transmission fluid (2) Engine oil (1) Door trim panel (4) Rear bumper (1) Brake pads (4) Fuel pump (3) Instrument cluster (1) Radiator (1) Fuse box (17) Door lock (1) Side mirror (1) Warning light – error code (2) Windshield wipers (1) EGR valve (1) Steering wheel (2)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos