Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : How to replace the rear hub bearing on Chevrolet Matiz

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Bearing
Operation: How to replace the rear hub bearing on Chevrolet Matiz

Let's see in this video how to remove and replace the rear wheel bearing on a second series Chevrolet Matiz. First we lift the car on the back and start by removing the wheel; then we remove the hub bolt cover and remove the safety cotter pin. At this point we unscrew the bolt to remove the drum, using a socket wrench; we disconnect the handbrake cable to extract it. We just have to extract the bearing, tapping on it; insert the new one, greasing the bearing seat, following the video to the end!


Posted on 19 January 2024 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos