Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Matiz
  6. : Door panel

Chevrolet Matiz - Door panel

Chevrolet Matiz (1998-2010 / MK 1)
How to remove the door panel on Matiz

How to mount the door panel of a Chevrolet Matiz. Disconnect the battery terminals in the engine compartment, unscrew the screws located in the space of the …read all…
Posted on 28 November 2023 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
How to remove the door panel of a Chevrolet Matiz

Let's see how to remove the door panel of a Chevrolet Matiz. We remove with a lever the plastic placed at the corner of the window. With a screwdriver we go to …read all…
Posted on 22 November 2023 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
How to remove the door panel of a Chevrolet Matiz

We remove the door panel of a Chevrolet Matiz to carry out maintenance inside it, we operate with a screwdriver or screwdriver; unscrew the screws located …read all…
Posted on 2 November 2023 by ScegliAuto

Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (3) Battery (1) Air Vents (1) Spark plugs (2) Key (1) Timing belt (5) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (1) Bearing (3) Brake discs (1) Headlight (1) Tail light (3) Air filter (4) Cabin air filter (7) Petrol filter (3) Oil filter (2) Hand brake (1) Clutch (3) Injectors (1) Accessory Kit (1) Headlight bulb (3) Rear light bulb (9) Window motor (1) Gear oil (2) Engine oil (1) Door panel (3) Rear bumper (1) Brake pads (4) Fuel pump (3) Instrument cluster (1) Fuse box (14) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) EGR valve (1) Steering wheel (1)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos