Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : How to disassemble the door panel of the Daewoo Matiz

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Door panel
Operation: How to disassemble the door panel of the Daewoo Matiz

Disconnect the battery for safety, especially if the door has electrical components. Use a plastic lever (not a screwdriver that could scratch) to remove the cover near the window. Unscrew the tightening bolts of the handle. With a suitable tool, detach the clips that secure the panel. Using a plastic lever, remove the door panel, disconnect any power clamps and release cable. Remember to proceed with caution to avoid damaging the electrical components or internal mechanisms of the door. Good job!


Posted on 5 May 2024 by ScegliAuto



How to replace the timing belt in your Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) This video will teach you how to replace the old timing belt in your Daewoo Matiz with a new one. To facilitate removal and replacement of the belt,
How do you remove the Daewoo Matiz instrument cluster?
Chevrolet Matiz (1998-2010 / MK 1) In order to remove the Daewoo Matiz instrument panel, you need to pry with an object, so that you can detach the plastic cover that surrounds the cen
How to replace the starter fuse in the Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) In today's video we see how to replace the starter fuse in the Daewoo Matiz. First we buy a set of fuses; this is possible on online spare parts site

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos