Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : Car stereo

Chevrolet Matiz - Car stereo

Car Stereo Chevrolet Matiz (1998-2010 / mk 1)

Chevrolet Matiz (1998-2010 / MK 1)
Replacing the Car Radio on a Chevrolet Matiz
Remove the entire large radio surround, which also houses the air vents, by pulling it off by hand with force (if it is too difficult, use a small flat …Read all…
Posted on 8 May 2026 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
Instructions for Removing the Car Radio
To remove the car radio, first detach the plastic trim surrounding the radio itself, including the air vents, the instrument cluster trim, and the hazard light …Read all…
Posted on 10 February 2026 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
Installation of an Audio System
If you enjoy listening to music in your car, here’s how to install a powerful stereo system. Start by installing the woofer speakers in the door by removing …Read all…
Posted on 4 February 2026 by ScegliAuto
Alternator (2) Speaker (1) Air conditioning (1) Car stereo (3) Battery (1) Air vents (1) Spark plugs (2) Key (1) Timing belt (5) Checks and maintenance (3) Throttle body (1) Dashboard (1) Shifter boot (1) Bearing (3) Brake rotors (1) Headlight (1) Tail light (3) Air filter (4) Cabin air filter (7) Fuel filter (4) Oil filter (2) Parking brake (1) Clutch (3) Fuel injectors (1) Accessory kit (1) Headlight bulb (3) Tail light bulb (9) Power window motor (1) Transmission fluid (2) Engine oil (1) Door trim panel (4) Rear bumper (1) Brake pads (4) Fuel pump (3) Instrument cluster (1) Radiator (1) Fuse box (17) Door lock (1) Side mirror (1) Warning light – error code (2) Windshield wipers (1) EGR valve (1) Steering wheel (2)

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos