Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of an Audio System

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Car stereo

If you enjoy listening to music in your car, here’s how to install a powerful stereo system. Start by installing the woofer speakers in the door by removing the cover panel. Trace a template on the panel in an area where the speaker can be fitted, then drill a hole to introduce the jigsaw blade to create a hole of the correct diameter. Now, to install the tweeter speakers, remove the plastic cover from the pillar and use a hole saw to create a suitable hole for the speaker. At this point, connect the speakers to the crossover filter, which you will hide under the carpet or dashboard. Connect the amplifiers as per the instructions included in the kit using robust cables and secure ground connections. Everything will then be positioned in the boot of the vehicle.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram for Chevrolet Matiz
Fuse Diagram for Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) The Chevrolet Matiz has two fuse boxes. One is located in the engine compartment next to the battery, and the other is in the cabin on the driver's s…
How to Replace the Oil Filter on a Chevrolet Matiz
How to Replace the Oil Filter on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) To replace the oil filter, first drain the oil from the designated sump by unscrewing the plug. Use a suitable container to collect the oil that will…
Replacing the Timing Belt on Chevrolet Matiz
Replacing the Timing Belt on Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) When replacing the timing belt, which is done every 62,000 miles, you must also replace the water pump, the belt tensioner, and the corresponding bea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos