Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Matiz
  6. : Chevrolet Matiz fuse diagram

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Fuse box
Operation: Chevrolet Matiz fuse diagram

The Chevrolet Matiz has two fuse boxes, one is located in the engine compartment next to the battery and the other is located in the cockpit on the driver's side of the lower dashboard. The layout of the engine compartment fuse box is as follows: 1 Air conditioning compressor 2 Low fan 3 High fan 4 Wheel lock prevention system 5 Front fog lights 6 Horn 7 Lighting (right) 8 Lighting (left) 9 Repair 10 Repair 11 Repair 12 Left low beam 13 Right low beam 14 Main power supply (battery) 15 Commissioning 2 16 engine control system 17 Repair 18 traffic lights 19 petrol pump 20 Emergency 21 rear fog lamp 22 engine control unit 23 Commissioning 1 24 fuse puller The layout of the fuse box in the passenger compartment is as follows: 1 day light 2 Warning display / indicator light 3 interior light 4 Lock 5 brake light 6 Wiper / rear window washer 7 Window cleaner 8 reverse light 9 engine 10 Group 11 Airbag 12 Electric window 13 Directional signals 14 Engine control system 15 Repair and 16 lighter 17 Audio.


Posted on 2 July 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Matiz 1998-2010 - Where are the fuses located on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the cigarette lighter fuse on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where are the fuse boxes located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - How do you replace a Chevrolet Matiz fuse? Read Answer
    • Matiz 1998-2010 - Where are the Chevrolet Matiz fuses located? Read Answer
    • Matiz 1998-2010 - Where is the fuse box located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the Chevrolet Matiz fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos