Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : Location and layout of the Chevrolet Matiz fuse boxes

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Fuse box
Operation: Location and layout of the Chevrolet Matiz fuse boxes

In today's video tutorial we will see the positioning of the fuse boxes (internal and external) of the Chevrolet Matiz, but also of the Spark. First we get on board the car, on the driver's side, to locate the internal fuse box; it is found at the bottom above the pedals, by removing the plastic cover to access it, as shown in the video. Instead we find the external fuse box on the engine compartment, next to the battery; remove the plastic cover to access the fuses, identifying the diagram inside the covers or in the use and maintenance booklet!


Posted on 7 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Matiz 1998-2010 - Where are the fuses located on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the cigarette lighter fuse on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where are the fuse boxes located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - How do you replace a Chevrolet Matiz fuse? Read Answer
    • Matiz 1998-2010 - Where are the Chevrolet Matiz fuses located? Read Answer
    • Matiz 1998-2010 - Where is the fuse box located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the Chevrolet Matiz fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos