Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : Oil filter

Chevrolet Matiz - Oil filter

Oil Filter Chevrolet Matiz (1998-2010 / mk 1)

Chevrolet Matiz (1998-2010 / MK 1)
How to Replace the Oil Filter on a Chevrolet Matiz 800
In this video tutorial, see how to replace the oil filter on a Chevrolet Matiz 800 by following some simple steps that will allow you to work independently, …Read all…
Posted on 12 August 2026 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
How to Replace the Oil Filter on a Chevrolet Matiz
To replace the oil filter, first drain the oil from the designated sump by unscrewing the plug. Use a suitable container to collect the oil that will flow out. …Read all…
Posted on 11 March 2026 by ScegliAuto
Alternator (2) Speaker (1) Air conditioning (1) Car stereo (3) Battery (1) Air vents (1) Spark plugs (2) Key (1) Timing belt (5) Checks and maintenance (3) Throttle body (1) Dashboard (1) Shifter boot (1) Bearing (3) Brake rotors (1) Headlight (1) Tail light (3) Air filter (4) Cabin air filter (7) Fuel filter (4) Oil filter (2) Parking brake (1) Clutch (3) Fuel injectors (1) Accessory kit (1) Headlight bulb (3) Tail light bulb (9) Power window motor (1) Transmission fluid (2) Engine oil (1) Door trim panel (4) Rear bumper (1) Brake pads (4) Fuel pump (3) Instrument cluster (1) Radiator (1) Fuse box (17) Door lock (1) Side mirror (1) Warning light – error code (2) Windshield wipers (1) EGR valve (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos