Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Matiz
  6. : Tail light

Chevrolet Matiz - Tail light

Chevrolet Matiz (1998-2010 / MK 1)
How to change the rear turn signal bulb on the Chevrolet Matiz

To replace the Chevrolet Matiz rear turn signal bulb it is necessary to open the tailgate, remove the rear light unit using a screwdriver to unscrew the screw …read all…
Posted on 17 December 2022 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
Chevrolet Matiz rear light replacement

In this simple video tutorial we will see how to remove and replace the rear light in a Chevrolet Matiz: the procedure is carried out quickly and does not …read all…
Posted on 25 December 2023 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
How to replace the stop light on Matiz

Replacing the rear light on a Chevrolet Matiz? We open the hatch and remove the headlight. Unscrew the tightening screws on the side of the rear light with a …read all…
Posted on 18 December 2023 by ScegliAuto

Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (3) Battery (1) Air Vents (1) Spark plugs (2) Key (1) Timing belt (5) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (1) Bearing (3) Brake discs (1) Headlight (1) Tail light (3) Air filter (4) Cabin air filter (7) Petrol filter (3) Oil filter (2) Hand brake (1) Clutch (3) Injectors (1) Accessory Kit (1) Headlight bulb (3) Rear light bulb (9) Window motor (1) Gear oil (2) Engine oil (1) Door panel (3) Rear bumper (1) Brake pads (4) Fuel pump (3) Instrument cluster (1) Fuse box (14) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) EGR valve (1) Steering wheel (1)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos