Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Matiz
  6. : Headlight bulb

Chevrolet Matiz - Headlight bulb

Chevrolet Matiz (1998-2010 / MK 1)
How to change the headlight bulbs on Chevrolet Matiz

Let's see how to replace the headlight bulbs of a Chevrolet Matiz. We open the front hood by pulling the lever located at the bottom right of the dashboard, …read all…
Posted on 17 November 2023 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
How to replace the parking light on the Chevrolet Matiz

A very simple repair on this car that allows you to save time and money by simply following this short and very clear guide. Open and lift the hood, and start …read all…
Posted on 21 September 2023 by ScegliAuto
Chevrolet Matiz (1998-2010 / MK 1)
Headlight bulb replacement

In order to replace the headlight bulb (H4 socket) it is necessary to remove the headlight itself, as there is not enough space to put your hands in, and at …read all…
Posted on 28 August 2023 by ScegliAuto

Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (3) Battery (1) Air Vents (1) Spark plugs (2) Key (1) Timing belt (5) Checks and maintenance (4) Throttle body (1) Dashboard (1) Gearshift gaiter (1) Bearing (3) Brake discs (1) Headlight (1) Tail light (3) Air filter (4) Cabin air filter (7) Petrol filter (3) Oil filter (2) Hand brake (1) Clutch (3) Injectors (1) Accessory Kit (1) Headlight bulb (3) Rear light bulb (9) Window motor (1) Gear oil (2) Engine oil (1) Door panel (3) Rear bumper (1) Brake pads (4) Fuel pump (3) Instrument cluster (1) Fuse box (14) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) EGR valve (1) Steering wheel (1)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos