Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light on the Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Headlight bulb

This is a very simple repair on this vehicle that saves you time and money by following this short and clear guide. Open and lift the bonnet, then start unscrewing the two bolts that secure the headlamp. You can now remove the entire headlamp by simply lifting it and disconnecting the connector. Remove the rubber cap, and you can easily detach the bulb. Insert the new bulb and repeat the same process on the other side. Retrace your steps to reassemble everything, and you're done!

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear position light bulb on a Chevrolet Matiz
How to replace the rear position light bulb on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Before starting, open the rear tailgate of your Chevrolet Matiz. Begin by unscrewing and removing the screws that secure the rear light to its housin…
Replacing the Rear Light on a Chevrolet Matiz
Replacing the Rear Light on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) In this simple video tutorial, you will learn how to remove and replace the rear light on a Chevrolet Matiz: the procedure is quick and does not requ…
Disassembly of the steering wheel of the Chevrolet Matiz
Disassembly of the steering wheel of the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Today we will see the necessary instructions that will allow us to disassemble and replace the steering wheel of the Chevrolet Matiz. First of all, w…

    Frequently Asked Questions

    • Matiz 1998-2010 - How to replace the headlight bulb on a Chevrolet Matiz? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos