Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear position light bulb on a Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

Video tutorial

Before starting, open the rear tailgate of your Chevrolet Matiz. Begin by unscrewing and removing the screws that secure the rear light to its housing.

Next, unclip and remove the rear light, then disconnect the electrical plug. This will give you access to the electrical connector of the blown position light bulb.

Proceed by disconnecting the relevant electrical connector. At this point, unclip and remove the blown bulb, and you will have successfully completed the disassembly.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light on a Matiz
How to Replace the Brake Light on a Matiz
Chevrolet Matiz (1998-2010 / MK 1) Replace the rear light on a Chevrolet Matiz? Open the boot and remove the light. Use a screwdriver to unscrew the securing screws located at the side…
How to Remove the Bulbs in the Rear Light on Chevrolet Matiz
How to Remove the Bulbs in the Rear Light on Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) How to remove the bulbs in the rear light on Chevrolet Matiz? Follow these steps: unscrew the screws around the light unit with a screwdriver, lever …
How to Change the Bulbs on a Chevrolet Matiz
How to Change the Bulbs on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) How do you change the damaged bulbs on a Chevrolet Matiz? Here’s how to remove the lamp. Open the boot lid, unscrew the securing screws at the top an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos