Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Bulbs on a Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Tail light bulb

How do you change the damaged bulbs on a Chevrolet Matiz? Here’s how to remove the lamp. Open the boot lid, unscrew the securing screws at the top and bottom of the lamp using a screwdriver. Disconnect the rear lamp from its housing once all screws are removed (disconnect the power terminals). Change the damaged bulbs with new ones (same size and voltage). Refit the lamp with the associated screws and reconnect the power terminals. Operate the control buttons to check the operation of the bulbs.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlight Bulbs on a Chevrolet Matiz
Replacing the Rear Headlight Bulbs on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Today, in this tutorial, you will learn how to remove and replace the bulbs of the rear headlight on a Chevrolet Matiz. Start by opening the boot and…
How to Change the Headlight Bulbs on a Chevrolet Matiz
How to Change the Headlight Bulbs on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Learn how to replace the headlight bulbs on a Chevrolet Matiz. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and…
Replacing the Rear Brake Light Bulb on a Chevrolet Spark, Matiz
Replacing the Rear Brake Light Bulb on a Chevrolet Spark, Matiz
Chevrolet Matiz (1998-2010 / MK 1) In this video tutorial, you will learn how to remove the rear light and replace the brake light bulb on a Chevrolet Spark, as well as on a Matiz. Fir…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos