Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Chevrolet Corvette remote control

Model: Chevrolet Corvette C7 - Years 2014-2019
Part: Key

In this video we see how to change the battery of the Chevrolet Corvette remote control. We will only need a CR2032 button battery, and a small flat-blade screwdriver. First, we remove the physical key from the remote control, and in the space left by the key, we insert the screwdriver and pry it open in two the body of the remote control. It takes delicacy because these remotes are very fragile. We remove the old battery from its holder, leaving the metal base in place. We change the battery paying attention to the installation direction and then we can close the body. We put the physical key back in place and the operation is completed.

Posted on 31 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Control Battery of the Chevrolet Corvette?
How to Replace the Remote Control Battery of the Chevrolet Corvette?
Chevrolet Corvette (1984-1996 / C4) To replace the battery of the Chevrolet Corvette remote control, use an object to pry open the bottom part of the device: by prying, you can separate…
How to Replace the Remote Battery of the Chevrolet Corvette C6
How to Replace the Remote Battery of the Chevrolet Corvette C6
Chevrolet Corvette (2005-2013 / C6) If the remote for your Chevrolet Corvette C6 (2005-2013) has suddenly stopped working due to a dead battery, you need to replace it by following thes…
How to Replace the Key Battery of the Corvette C6
How to Replace the Key Battery of the Corvette C6
Chevrolet Corvette (2005-2013 / C6) This brief video tutorial explains how to replace the battery of the remote key for the 2010 Chevrolet Corvette C6. Insert a flathead screwdriver int…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos