Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Shift Gaiter in a Chevrolet Kalos

Model: Chevrolet Kalos MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Shifter boot

Video tutorial

Want to replace the gear shift gaiter in your Chevrolet Kalos? Follow these steps: disconnect the leather gaiter frame from the central tunnel using a plastic lever (disconnect any power clips), remove it by cutting the plastic tie with pliers. For assembly: fit the new leather gaiter onto the frame where the clips are located, then slide it onto the rod in the central tunnel, tightening the new gaiter with the tie until it is secure on the lever.

Finally, test the movement of the rod in the central tunnel to ensure the correct assembly of the parts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a Chevrolet Kalos
Removing the Door Panel on a Chevrolet Kalos
Chevrolet Kalos (2002-2008 / MK 1) To remove the panel of a Chevrolet Kalos, take off the panel for replacement or to access the inside of the door. Remove the plastic cover around the…
Where to Find the Fuse Box of the Chevrolet Kalos
Where to Find the Fuse Box of the Chevrolet Kalos
Chevrolet Kalos (2002-2008 / MK 1) The fuse box on your Chevrolet Kalos is easy to locate, and with this guide, you won't have any difficulty completing the task. First, park the car o…
Remove Rear Light on Chevrolet Kalos
Remove Rear Light on Chevrolet Kalos
Chevrolet Kalos (2002-2008 / MK 1) Is the rear light of your Chevrolet Kalos broken? Here’s how to remove it from inside the rear bodywork. Open the rear boot. Locate the screws that s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos