Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window regulator mechanism and the side window of the Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years 2009-2017

Below we will see the instructions that will allow us to disassemble and replace the window regulator mechanism and the side glass of the Chevrolet Traverse. First, we open the front door and start disassembling and removing the door panel, unscrewing all the fixing screws; then we unscrew the screws of the window regulator bracket, then remove the side glass. At this point, disconnect the electrical wiring of the window motor to remove the entire mechanism, replacing it with the new one; reassemble all the window components and the side glass, following the video tutorial until the end!

Posted on 14 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exterior Door Handle on a Chevrolet Traverse?
How to Replace the Exterior Door Handle on a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the exterior door handle on a Chevrolet Traverse, open the car door to detach the circular rubber cover on the side of the door. Under thi…
How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the rear shock absorber on a Chevrolet Traverse, lift the vehicle so that the corresponding wheel is off the ground. Once lifted, loosen t…
How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
How to Replace the Rear Shock Absorber on a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the rear shock absorber on a Chevrolet Traverse, lift the vehicle so that the corresponding wheel is not in contact with the ground. Once …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos