Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Driver's Side Glass on Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Side window

Before reaching the window, you need to remove the door panel: to do this, detach the plastic cover near the opening handle and unscrew the underlying T20 screw. Repeat the operation at the bottom of the window switch buttons. Now, using a plastic lever, pry all around the panel, working along the seams with the bodywork. Also detach the triangular plastic piece on the pillar near the glass. While removing the panel, disconnect the lock cable and the window switch connector. Unscrew the two screws related to the metal bracket, detach the adhesive, and unscrew the two 10mm screws that secure the glass, then remove it.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Chevrolet Cruze?
What is the fuse diagram for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video, we can see where the fuse boxes of the Chevrolet Cruze are located and their corresponding diagrams, useful if we need to check the fu…
What is the fuse layout for the Chevrolet Cruze?
What is the fuse layout for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video we can see where the fuse boxes of the Chevrolet Cruze are located and what their respective diagrams are, to consult in case we need t…
What is the fuse layout of the Chevrolet Cruze?
What is the fuse layout of the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video we can see where the fuse boxes of the Chevrolet Cruze are located and what their respective diagrams are, useful in case we need to ch…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos