Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

In this article, we will see how to reset the service light of the Chevrolet Cruze. For this operation, no tools are needed, and it takes less than 1 minute to complete.

First, you need to start the instrument panel. After starting the panel, press the menu button on the light control.

After pressing the menu button, use the appropriate wheel to navigate the menu until you find the oil change light. Once found, press and hold the SET/CLR button on the side of the light control for 3 seconds.

At this point, the oil change will be reset, and so will the service light. We recommend performing this procedure only after having the car serviced.


Posted on 31 May 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a 2015 Chevrolet Cruze
How to Reset the Oil Light on a 2015 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) To manually reset the oil light on the dashboard of your Chevrolet Cruze, follow this procedure. It is a straightforward operation, and if you follow…
How to Reset the Oil Light on a Chevrolet Cruze
How to Reset the Oil Light on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this video, see how to reset the service light on a Chevrolet Cruze MK1: enter the vehicle and close all four doors, then remove the key from the …
How to Reset the Maintenance Light on a 2015 Chevrolet Cruze
How to Reset the Maintenance Light on a 2015 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Let's see how to reset the maintenance light on a 2015 Chevrolet Cruze: insert the key into the ignition and turn it to the "ON" position without sta…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos