Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

In this video, see how to reset the service light on a Chevrolet Cruze MK1: enter the vehicle and close all four doors, then remove the key from the ignition. Wait for about two minutes and then reinsert the key. Turn on the ignition by turning the key to position two. Within a minute, press and release the accelerator pedal fully three times.

This will reset the service light. To confirm, turn off the ignition, wait about a minute, and then turn on the ignition again to check that the light is indeed off.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light of the Chevrolet Cruze
How to Reset the Oil Light of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) To correctly reset the engine oil light of your Chevrolet Cruze (2009-2015), simply follow a very straightforward procedure, almost identical to thos…
How to Reset the Service Light on a Chevrolet Cruze
How to Reset the Service Light on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today, we will discover the procedure to reset the service light for the regular maintenance oil change on a Chevrolet Cruze. First, get into the car…
How to reset the oil light on the Chevrolet Cruze
How to reset the oil light on the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) Today we will see how to reset the oil light after replacing it on a Chevrolet Cruze vehicle. Turn on the instrument panel and press the menu button …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos