Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Manufacturer's Badge on a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Manufacturer emblem

See other generations:
Video tutorial

In today's video, you will see how to remove and replace the badge (just the sticker) of the manufacturer on a first-generation Chevrolet Captiva, following the instructions below. First, obtain some very thin levers to insert on the sides of the badge; then remove the badge, cleaning the area well before fitting the new one. At this point, fit the new one (in this case, it is adhesive); if you want to replace the entire badge, it will be necessary to remove the front trim and proceed with its replacement.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Modifying Headlights on Chevrolet Captiva
Modifying Headlights on Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …
How to Replace the Glass of the Wing Mirror on the Chevrolet Captiva
How to Replace the Glass of the Wing Mirror on the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) In this tutorial video, learn how to remove the glass from the left external wing mirror and replace it with a new one on the Chevrolet Captiva, as w…
How to Remove the Rear Bumper from a Chevrolet Captiva
How to Remove the Rear Bumper from a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Before you can start, open the rear tailgate of the boot of your Chevrolet Captiva. Begin by removing the rear lights, simply by unscrewing the fixin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos