Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram and Where is the Fuse Box on a Chevrolet Spark?

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Fuse box

The video attached to this article shows the fuse diagram for our Chevrolet Spark. Fuses are used to prevent damage to the vehicle's electrical components by interrupting the circuit in case of an overload or short circuit. The fuses are grouped in the fuse box. To access it, start by sitting in the driver's seat, then unclip and remove the cover of the fuse box located on the lower left side of the steering column. Once done, you will have correctly accessed the fuse box and its respective fuses.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Position and diagram of the fuse boxes of the Chevrolet Spark MK2.
Position and diagram of the fuse boxes of the Chevrolet Spark MK2.
Chevrolet Spark (2009-2016 / M300, MK 1) In this video, we see the location and diagram of the fuse boxes of the Chevrolet Spark MK2: the cabin box is located at the bottom of the dashboard,…
Position and diagram of the fuse boxes of the Chevrolet Spark
Position and diagram of the fuse boxes of the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In this video we see the position of the fuse boxes of the Chevrolet Spark: The interior fuse box is located under the cover, to the left of the stee…
Where is the fuse box of the Chevrolet Spark located?
Where is the fuse box of the Chevrolet Spark located?
Chevrolet Spark (2009-2016 / M300, MK 1) The Chevrolet Spark (called Matiz in some countries) produced from 2013 to 2015 contains two fuse boxes. The first fuse box is located inside the eng…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos