|
Do it yourself
| |||
| ||||
How to Reset the Service Light on the Chevrolet Captiva?
Model: Chevrolet Captiva
MK 1
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
The procedure is quite simple and quick, as we can see from the video. First, ensure that maintenance requiring the service light is performed, which includes a full service with oil and filter replacement. Once done, follow the instructions in the video to reset this light. Also, make sure that all doors are properly closed and turn on the ignition (without starting the engine). Now, press the accelerator pedal down fully three times in quick succession, then turn off and turn on the ignition again. The light should now be reset.
Updated on 29 April 2026 by ScegliAuto
Related tutorials
Chevrolet Captiva
(2006-2018 /
MK 1)
.. This article explains how to reset the service light on the Chevrolet Captiva. The procedure is simple and requires no tools.. …
Chevrolet Captiva
(2006-2018 /
MK 1)
Today we will show you how to reset the service light on a Chevrolet Captiva vehicle. The steps to follow are simple and quick to perform independent…
Chevrolet Captiva
(2006-2018 /
MK 1)
In this article, you will learn how to reset the service light on a Chevrolet Captiva if it does not reset after a service. To reset this light, firs…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Hyundai i20
These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |