Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Chevrolet Silverado?

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Air filter

In this tutorial, you will see how to replace the air filter in a Chevrolet Silverado, a very simple and quick operation. To do this, you will need, in addition to the correct replacement part, a T25 Torx wrench. Open the hood and move to the passenger side where the airbox is located, then open it by removing the four screws at the corners. Next, remove the old filter, clean the inside of the box from any leaves and dirt, and insert the replacement in the correct orientation. Finally, reposition the top of the box and tighten the 4 screws.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Chevrolet Silverado 2
How to Replace the Air Filter on a Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) In this mini guide for your Chevrolet Silverado Mk2 (model years 2007-2014), discover the steps you need to follow to correctly replace the engine ai…
How to Replace the Air Filter in a 2020 Chevrolet Silverado
How to Replace the Air Filter in a 2020 Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) To replace the engine air filter in your 2020 Chevrolet Silverado, carefully follow these steps. First, completely turn off the vehicle and unlock th…
How to Replace the Air Filter on a Chevrolet Silverado
How to Replace the Air Filter on a Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) To replace the air filter on a Chevrolet Silverado, open the hood to access the filter box located in the engine compartment. Loosen the bolts that s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos