Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Two Front Supports in the Hood of the Chevrolet Optra

Model: Chevrolet Optra MK 1 - Years 2004-2013
Part: Body

In this video, you will learn how to install the two front supports in the hood of the Chevrolet Optra. Not all supports are compatible with the Chevrolet Optra. However, with a bit of patience and good will, you can find two front supports that fit well for this model by searching at a junkyard. Once found, insert them into the two slots located at the ends of the engine on top. Thread them into the two holes and try to lower the hood to see if it fits well with the supports and the latch. If everything is aligned, proceed to secure the supports with the bolts.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse diagram of a Chevrolet Optra
Fuse diagram of a Chevrolet Optra
Chevrolet Optra (2004-2013 / MK 1) In this very useful video guide today you will be able to see precisely all the diagrams of the two fuse boxes of a Chevrolet Optra, in the diagrams …
How to Remove the Front Headlight on a Chevrolet Optra?
How to Remove the Front Headlight on a Chevrolet Optra?
Chevrolet Optra (2004-2013 / MK 1) To remove the front headlight on a Chevrolet Optra, open the hood to access the screws securing it within its housing. These screws are located at th…
How to Replace the Air Filter in the Chevrolet Optra?
How to Replace the Air Filter in the Chevrolet Optra?
Chevrolet Optra (2004-2013 / MK 1) To replace the air filter in the Chevrolet Optra, open the hood to access the air filter box, located near the right front headlight, inside the engi…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos