Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Chevrolet Beat

Model: Chevrolet Beat MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

Video tutorial

If you plan to change the engine oil and the related filter on this vehicle yourself, you can find useful information in the description below and in the video. First, open the hood and lift the vehicle.

Locate the oil drain plug and proceed to unscrew it after placing a container on the floor to collect the used oil. From the top of the engine compartment, you can unscrew the oil filter with a socket wrench and replace it, including the gasket. Then, screw the filter back on and reinstall the oil drain plug.

Finally, fill the system with the new lubricant.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Chevrolet Beat
How to Change the Engine Oil in a Chevrolet Beat
Chevrolet Beat (2010-2021 / MK 1) Changing the engine oil and its filter is undoubtedly one of the most important maintenance tasks for your Chevrolet Beat. Below are the necessary st…
How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…
How to Replace the Shock Absorbers on a Chevrolet Beat
How to Replace the Shock Absorbers on a Chevrolet Beat
Chevrolet Beat (2010-2021 / MK 1) To replace the shock absorbers on a Chevrolet Beat, lift the car with a jack or a lift so that the wheel corresponding to the shock absorber being re…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos